ЭИ654 (15Х18Н12С4ТЮ)

Классификация

Страна Раздел Категория
Украина Коррозионно-стойкие сплавы и стали Коррозионно-стойкие сплавы

Химический состав

Стандарт Fe, % Si, % Mn, % Cr, % Ti, % Cu, % Ni, % V, % Al, % P, % C, % S, % Mo, % W, %
ГОСТ 5632-14 60.215–67.05 3.8–4.5 0.5–1 17–19 0.4–0.7 < 0.3 11–13 < 0.2 0.13–0.35 < 0.035 0.12–0.17 < 0.03 < 0.3 < 0.2

Примечание: Электрошлаковый переплав (-Ш): S < 0.015

Примечание: ГОСТ Р 56594-2015: по требованию S < 0.020

Информация о поставщиках

Properties

Property
According to GOST R 56594-2015 Yield strength:> 373 MPa Tensile strength:> 687 MPa Elongation:> 40% Density: 7.51 g / cm3
Operational characteristics According to ST TsKBA 025-2006 Application temperature: -70 - 300 ° C
According to GOST 5949 Note. The norms of mechanical properties apply to samples taken from steel with a diameter or thickness of up to 60 mm.
For steel with a diameter or thickness of st. 60 to 100mm, a reduction in elongation of 1abs.% Is allowed,
relative narrowing by 5abs.% and impact strength by 4.9 J / cm2 at a rate of less than 78.4 J / cm2 and by 9.8 J / cm2 at a rate of 78.4 J / cm2 or more.
For steel with a diameter or thickness of st. 100 to 150mm, a reduction in elongation of 3abs.% Is allowed,
a relative narrowing of 10 abs.% and impact strength of 9.8 J / cm2 at a rate of less than 78.4 J / cm2 and at 14.7 J / cm2 at a rate of 78.4 J / cm2 or more.
Quenching 950 - 1050 ° С, cooling in water
Yield strength:> 375 MPa Tensile strength:> 720 MPa Relative elongation:> 25% Impact strength KCU at 20 ° C:> 78 J / cm2 Relative narrowing:> 40%
By agreement M1 (tests at elevated temperature) Note By agreement
Note Corrosion-resistant steel Work in aggressive environments Austenitic-ferritic (two-phase, duplex) steel

Стандарты

Описание химических элементов

Элемент Единицы измерений Описание
Fe % Железо
Si % Кремний
Mn % Марганец
Cr % Хром
Ti % Титан
Cu % Медь
Ni % Никель
V % Ванадий
Al % Алюминий
P % Фосфор
C % Углерод
S % Сера
Mo % Молибден
W % Вольфрам